[Tinyos-2-commits] CVS: tinyos-2.x/tos/platforms/iris/chips/rf230 HplRF230C.nc, 1.9, 1.10 HplRF230P.nc, 1.4, 1.5 RadioConfig.h, NONE, 1.1 HplRF2xx.h, 1.2, NONE HplRF2xxC.nc, 1.2, NONE HplRF2xxP.nc, 1.3, NONE RadioAlarm.h, 1.2, NONE

[Miklos Maroti]

Update of /cvsroot/tinyos/tinyos-2.x/tos/platforms/iris/chips/rf230
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv25581/chips/rf230

Added Files:
	HplRF230C.nc HplRF230P.nc RadioConfig.h 
Removed Files:
	HplRF2xx.h HplRF2xxC.nc HplRF2xxP.nc RadioAlarm.h 
Log Message:
moving files from rf230 to rf2xx, prepare the support of rf212



--- NEW FILE: RadioConfig.h ---
/*
 * Copyright (c) 2007, Vanderbilt University
 * All rights reserved.
 *
 * Permission to use, copy, modify, and distribute this software and its
 * documentation for any purpose, without fee, and without written agreement is
 * hereby granted, provided that the above copyright notice, the following
 * two paragraphs and the author appear in all copies of this software.
 * 
 * IN NO EVENT SHALL THE VANDERBILT UNIVERSITY BE LIABLE TO ANY PARTY FOR
 * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
 * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE VANDERBILT
 * UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 * THE VANDERBILT UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
 * ON AN "AS IS" BASIS, AND THE VANDERBILT UNIVERSITY HAS NO OBLIGATION TO
 * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
 *
 * Author: Miklos Maroti
 */

#ifndef __RADIOCONFIG_H__
#define __RADIOCONFIG_H__

#include <MicaTimer.h>
#include <RF230.h>
#include <util/crc16.h>

enum
{
	/**
	 * This is the value of the TRX_CTRL_0 register
	 * which configures the output pin currents and the CLKM clock
	 */
	RF230_TRX_CTRL_0_VALUE = 0,

	/**
	 * This is the default value of the CCA_MODE field in the PHY_CC_CCA register
	 * which is used to configure the default mode of the clear channel assesment
	 */
	RF230_CCA_MODE_VALUE = RF230_CCA_MODE_3,

	/**
	 * This is the value of the CCA_THRES register that controls the
	 * energy levels used for clear channel assesment
	 */
	RF230_CCA_THRES_VALUE = 0xC7,
};

/* This is the default value of the TX_PWR field of the PHY_TX_PWR register. */
#ifndef RF230_DEF_RFPOWER
#define RF230_DEF_RFPOWER	0
#endif

/* This is the default value of the CHANNEL field of the PHY_CC_CCA register. */
#ifndef RF230_DEF_CHANNEL
#define RF230_DEF_CHANNEL	11
#endif

/*
 * This is the command used to calculate the CRC for the RF230 chip. 
 * TODO: Check why the default crcByte implementation is in a different endianness
 */
inline uint16_t RF230_CRCBYTE_COMMAND(uint16_t crc, uint8_t data)
{
	return _crc_ccitt_update(crc, data);
}

/**
 * This is the timer type of the radio alarm interface
 */
typedef TOne TRadio;

/**
 * The number of radio alarm ticks per one microsecond (0.9216). 
 * We use integers and no parentheses just to make deputy happy.
 */
#define RADIO_ALARM_MICROSEC	(7372800UL / MHZ / 32) * (1 << MICA_DIVIDE_ONE_FOR_32KHZ_LOG2) / 1000000UL

/**
 * The base two logarithm of the number of radio alarm ticks per one millisecond
 */
#define RADIO_ALARM_MILLI_EXP	10

#endif//__RADIOCONFIG_H__

--- HplRF2xx.h DELETED ---

--- HplRF2xxC.nc DELETED ---

--- HplRF2xxP.nc DELETED ---

--- RadioAlarm.h DELETED ---