[Tinyos-contrib-commits] CVS: tinyos-1.x/contrib/handhelds/tos/interfaces Bluetooth.nc, NONE, 1.1 RovingNetworks.h, NONE, 1.1

[steve ayer]

Update of /cvsroot/tinyos/tinyos-1.x/contrib/handhelds/tos/interfaces
In directory sc8-pr-cvs10.sourceforge.net:/tmp/cvs-serv21529

Added Files:
	Bluetooth.nc RovingNetworks.h 
Log Message:

new interface for bluetooth radio, with accompanying header for
supporting rovingnetworks libarary module.


--- NEW FILE: Bluetooth.nc ---
/*
 * Copyright (c) 2007, Intel Corporation
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 * 
 * Redistributions of source code must retain the above copyright notice, 
 * this list of conditions and the following disclaimer. 
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution. 
 *
 * Neither the name of the Intel Corporation nor the names of its contributors
 * may be used to endorse or promote products derived from this software 
 * without specific prior written permission. 
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
 * POSSIBILITY OF SUCH DAMAGE.
 *
 *  Authors:  Steve Ayer, Adrian Burns
 *            February, 2007
 */



includes RovingNetworks;

interface Bluetooth {

   /* this will turn off the Bluetooth module */
   command result_t disable();

   /* write SPP (Serial Port Profile) data to the connected BT device */
   command result_t write(const uint8_t *buf, uint16_t len);

   /* after this command is called there will be no link to the connected device */
   command result_t disconnect();

   /* commands useful for Master(client) applications only */
   /* do an BT Inquiry to discover all listening devices within range */
   command void discoverDevices();

   /* connect to a specific device that was previously discovered */
   command result_t connect(uint8_t * addr);

   command void setRadioMode(uint8_t mode);
   command void setDiscoverable(bool disc);
   command void setEncryption(bool enc);
   command void setAuthentication(bool auth);
   command void setName(char * name);
   command void setPIN(char * name);
   command void resetDefaults();

   /* whether or not it succeeded */
   async event void connectionMade(uint8_t status);
   async event void connectionClosed(uint8_t reason);
   async event void commandModeEnded();
   /*
    * buffered data depends upon line demarcation or eot for this...
    *     event void dataAvailable(uint8_t * data, uint16_t len);
    * and this...
    *    event void discoveryStatus(uint8_t * devices);
    *
    */
   async event void dataAvailable(uint8_t data);
   event void writeDone();
}



--- NEW FILE: RovingNetworks.h ---
/* radioMode in enableBluetooth() can be set to one of the following modes,
/* see the RovingNetworks AT command set for further details on module configuration */
enum {
  SLAVE_MODE,
  MASTER_MODE,
  TRIGGER_MASTER_MODE,
  AUTO_MASTER_MODE    
};

enum { 
  NADA,
  INITIAL,
  FINAL
};
/*
const char * SETMODE =  "SM,";
const char * SETMASTERMODE =  "SM,1";
const char * SETSLAVEMODE =   "SM,0";
const char * DISCOVERRADIOS = "I,";
const char * DISCOVERRADIOS2 = ",0";

const char * SETFASTBAUD    = "SU,115";
const char * ENTERCOMMANDMODE = "$$$";
const char * SETSLEEPMODE   = "SW,0300";
const char * DIALRADIO      = "C,";
const char * HANGUPRADIO    = "R,1";
const char * WAKERADIO      = "";
*/