[Tinyos-devel] Jetos try1 image for TinyOS 2.1

[David Gay]

On Wed, Aug 6, 2008 at 8:27 PM, Razvan Musaloiu-E. <razvanm at cs.jhu.edu> wrote:
> One thing that doesn't seem to work quite reliably right now is the uisp.
> From my tests it seems to work very unreliably when is used for the
> upload of the tosboot using Windows as a host OS. The error happens quite
> frequently when Linux is the host OS. Perhaps somebody with more
> experience with uisp can tell us more about this.

I haven't had good luck with serial programming from a VM to a MIB510,
either using uisp or avrdude, over a USB-serial cable (because avrdude
didn't work either, and I did a bit of debugging, I'm not that
inclined to blame uisp). I'm not 100% clear if the problem is with the
VM, the USB-serial driver, the USB-serial cable, or the MIB510 itself
(I've previously had lesser problems with the same USB-serial cable -
it would work with uisp, but not for remote debugging). I've switched
to an ethernet-based programmer instead ;-)

David