[Tinyos-devel] Jetos try1 image for TinyOS 2.1

[Razvan Musaloiu-E.]

Hi!

On Wed, 6 Aug 2008, David Gay wrote:

> On Wed, Aug 6, 2008 at 8:27 PM, Razvan Musaloiu-E. <razvanm at cs.jhu.edu> wrote:
>> One thing that doesn't seem to work quite reliably right now is the uisp.
>> From my tests it seems to work very unreliably when is used for the
>> upload of the tosboot using Windows as a host OS. The error happens quite
>> frequently when Linux is the host OS. Perhaps somebody with more
>> experience with uisp can tell us more about this.
>
> I haven't had good luck with serial programming from a VM to a MIB510,
> either using uisp or avrdude, over a USB-serial cable (because avrdude
> didn't work either, and I did a bit of debugging, I'm not that
> inclined to blame uisp). I'm not 100% clear if the problem is with the
> VM, the USB-serial driver, the USB-serial cable, or the MIB510 itself
> (I've previously had lesser problems with the same USB-serial cable -
> it would work with uisp, but not for remote debugging). I've switched
> to an ethernet-based programmer instead ;-)
>

Thanks for the information! :-)

One more question: how about Windows? Does the uisp runs properly there?

Thank you!
Razvan ME