[Tinyos-help] Deluge: Nodes won't reboot over the air

[R Gartz]

Hello,

Indeed that was the problem, thx!

R.

On 8/7/06, Dongyan Chen <cdongyan at gmail.com> wrote:
>
> You might want to check your battery voltage. I ran into the same
> problem a while ago and it turns out that when the battery voltage is
> less than a certain value (I remember it's 2.7V) the flash in the MCU
> can't be re-programed.
>
> - Dongyan
>
> On 8/7/06, R Gartz <robin.gartz at gmail.com> wrote:
> > Hello,
> >
> > I'm having problems with Deluge.
> >
> > I've done everything the deluge-manual said, but the nodes won't reboot
> over
> > the air through TOSBase.
> >
> > The nodes do seem to receive some commands over the air, but  they do
> not
> > reboot, however they are saying (through the commandline output) that
> they
> > shall reboot from image A to image B...  but when checking againg with
> > deluge --ping, the nodes still execute image A
> > However, when I plug in one node at the programmer and issue the reboot
> > command, the node reboots....
> > When I issue an inject command, all the nodes install the new image..
> >
> >
> > I'm using the correct makerules from /tools/make and I'm using the
> correct
> > TOSBoot from: /lib/Deluge/TOSBoot/build/micaz/main.ihex
> > (all updated from CVS)
> >
> > Anyone knows what the problem could be?
> >
> >
> > greetings,
> >
> > R.
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Tinyos-help mailing list
> > Tinyos-help at Millennium.Berkeley.EDU
> >
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20060807/982ea41b/attachment.html