[Tinyos-help] Tiny os 2.0 set-mote-id

[KURT PETERS]

Thanks, that helps me get through a little, but doesn't explain how to get 
it to use srec instead of exe:
---------------------------
kurt at loki:/opt/tinyos-2.x/apps/Blink> tos-set-symbols build/micaz/main.srec 
build/micaz/main.srec.out-1 TOS_NODE_ID=1 ActiveMessageAddressC\$addr=1
Could not find symbol ActiveMessageAddressC$addr in build/micaz/main.exe, 
ignoring symbol.
Could not find symbol TOS_NODE_ID in build/micaz/main.exe, ignoring symbol.
----------------------------
kurt at loki:/opt/tinyos-2.x/apps/Blink> tos-set-symbols --srec 
build/micaz/main.srec build/micaz/main.srec.out-1 TOS_NODE_ID=1 
ActiveMessageAddressC\$addr=1
Could not find symbol ActiveMessageAddressC$addr in build/micaz/main.exe, 
ignoring symbol.
Could not find symbol TOS_NODE_ID in build/micaz/main.exe, ignoring symbol.

----Original Message Follows----
From: "David Gay" <dgay42 at gmail.com>
To: "KURT PETERS" <peterskurt at msn.com>
CC: tinyos-help at millennium.berkeley.edu
Subject: Re: [Tinyos-help] Tiny os 2.0 set-mote-id
Date: Fri, 1 Dec 2006 15:07:54 -0800

dgay at barnowl:~/motes/2.x/apps/Blink$ make -n mica2 install.11
...
cmd () { echo "$@"; $@; }; if [ x = x11 ]; then cmd cp
build/mica2/main.srec build/mica2/main.srec.out-11; else cmd
tos-set-symbols build/mica2/main.srec build/mica2/main.srec.out-11
TOS_NODE_ID=11 ActiveMessageAddressC\$addr=11 ; fi
...

Embedded in there, you'll see the 2.x incantation for change a mote's id:
tos-set-symbols build/mica2/main.srec build/mica2/main.srec.out-11
TOS_NODE_ID=11 ActiveMessageAddressC\$addr=11

The relevant symbol names have changed from 1.x

On 12/1/06, KURT PETERS <peterskurt at msn.com> wrote:
>Despite all that, I've tried:
>kurt at loki:/opt/tinyos-2.x/apps/Blink> tos-set-symbols build/micaz/main.srec
>build/micaz/main.srec.out 1
>Could not find symbol TOS_LOCAL_ADDRESS in build/micaz/main.exe, ignoring
>symbol.
>AND
>kurt at loki:/opt/tinyos-2.x/apps/Blink> tos-set-symbols --srec
>build/micaz/main.srec build/micaz/main.srec.out 1
>Could not find symbol TOS_LOCAL_ADDRESS in build/micaz/main.exe, ignoring
>symbol.
>
>after making the basic Blink program.
>Why isn't it looking for srec instead of exe?
>
>Oh, I'm using Suse 10.1 .
>
>
>Regards,
>Kurt
>
>
>