[Tinyos-help] MoteView

[Giri Baleri]

Program your sensor node with XMTS420 instead (XMeshBase can decode packets from XMesh apps only, NOT XSensor apps).
Also, make sure that the MICA2 plugged into MTS420 is powered by 3.7V Lithium battery (AA batteries don't provide enough voltage for MTS420 to function properly). 

Regards,
Giri

-----Original Message-----
From: tinyos-help-bounces at Millennium.Berkeley.EDU [mailto:tinyos-help-bounces at Millennium.Berkeley.EDU] On Behalf Of neliacatarina at portugalmail.pt
Sent: Tuesday, December 19, 2006 5:49 AM
To: Tinyos-help at Millennium.Berkeley.EDU
Subject: [Tinyos-help] MoteView

Hello,

I have a mica2 with XSensorMTS420(id=1) and another with XMeshBase(id=0).

If I put MTS420 directly in MIB510 with id=0 it apears like Gateway and I can see it's data. But with XMeshBase Moteview don't receave anything. The MTS420's leds toggle (both red and green) but XMeshBase seams like it's dead. Can you tell me what am I doing wrong?

Thanks


Nélia Santos
_______________________________________________
Tinyos-help mailing list
Tinyos-help at Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help