[Tinyos-help] Beginners help

[Michael Schippling]

This may be due to cygwin's lovely attempt at emulating UNIX end-of-line
behavior, vis CR/LF and DOgS. I've had similar trouble with shell scripts
after (silly me) installing cygwin with the _recommended_ UNIX emulation.
This may/not explain it:
     http://www.cygwin.com/cygwin-ug-net/using-textbinary.html
There's also a page someplace about how the filesystems are mounted
in order to set the behavior, but apparently I've lost my link...
"man mount" has some info, however I did try remounting the fs without
much success.

MS

Peter Mueller wrote:
> Hi,
> 
> I'm new to tinyos (but not to uCs etc).
> 
> I followed the installation guide for the 2.x version and installed cygwin from the package offered on tinyos.net
> 
> Installation seems to be ok. Only tos-check-env reported a wrong dot version (mine is newer).
> 
> But when I try to compile the Blink example for the tinynode several pages of errors appear. I don't believe they are tinynode related. But indicate a general problem of my installation. Here the first lines of output:
> 
> 
> $ make tinynode
> mkdir -p build/tinynode
>     compiling BlinkAppC to a tinynode binary
> ncc -o build/tinynode/main.exe -Os -Os -mdisable-hwmul -mstrict-align -Wall -Wsh
> adow -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=tinynode -fnesc-cfile=build/tiny
> node/app.c -board=  -fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())' -fn
> esc-dump='referenced(interfacedefs, components)' -fnesc-dumpfile=build/tinynode/
> wiring-check.xml BlinkAppC.nc -lm
> /cygdrive/c/Temp/cczxLXV0.s: Assembler messages:
> /cygdrive/c/Temp/cczxLXV0.s:4: Error: junk at end of line, first unrecognized ch
> aracter is `$'
> /cygdrive/c/Temp/cczxLXV0.s:6: Error: unrecognized symbol type ""
> /cygdrive/c/Temp/cczxLXV0.s:6: Error: junk at end of line, first unrecognized ch
> aracter is `$'
> /cygdrive/c/Temp/cczxLXV0.s:7: Error: expected comma after name `McuSleepC' in .
> size directive
> /cygdrive/c/Temp/cczxLXV0.s:8: Error: unknown opcode `mcusleepc$dirty:'
> /cygdrive/c/Temp/cczxLXV0.s:10: Error: junk at end of line, first unrecognized c
> haracter is `$'
> /cygdrive/c/Temp/cczxLXV0.s:11: Error: unrecognized symbol type ""
> /cygdrive/c/Temp/cczxLXV0.s:11: Error: junk at end of line, first unrecognized c
> haracter is `$'
> /cygdrive/c/Temp/cczxLXV0.s:12: Error: expected comma after name `McuSleepC' in
> .size directive
> /cygdrive/c/Temp/cczxLXV0.s:13: Error: unknown opcode `mcusleepc$powerstate:'
> /cygdrive/c/Temp/cczxLXV0.s:15: Error: junk at end of line, first unrecognized c
> haracter is `$'
> /cygdrive/c/Temp/cczxLXV0.s:18: Error: unrecognized symbol type ""
> /cygdrive/c/Temp/cczxLXV0.s:18: Error: junk at end of line, first unrecognized c
> haracter is `$'
> /cygdrive/c/Temp/cczxLXV0.s:19: Error: expected comma after name `McuSleepC' in
> .size directive
> /cygdrive/c/Temp/cczxLXV0.s:20: Error: unknown opcode `mcusleepc$msp430powerbits
> :'
> /cygdrive/c/Temp/cczxLXV0.s:114: Error: unrecognized symbol type ""
> /cygdrive/c/Temp/cczxLXV0.s:114: Error: junk at end of line, first unrecognized
> character is `$'
> /cygdrive/c/Temp/cczxLXV0.s:118: Error: unknown opcode `msp430dcocalibp$timermic
> ro$overf'
> /cygdrive/c/Temp/cczxLXV0.s:120: Error: unknown pseudo-op: `.l__framesize_msp430
> dcocalibp'
> 
> My compiler (on cygwin):
> $ ncc --version
> ncc: 1.2.1
> nescc: 1.2.7b
> gcc: gcc (GCC) 3.3.3 (cygwin special)
> 
> 
> Any ideas?
> 
> Thanks,
> Peter