[Tinyos-help] Basic i2c example for MSP430 or where to start a design

[Peter Mueller]

Hi,

I found this mail in the list:

http://www.mail-archive.com/tinyos-help@millennium.berkeley.edu/msg08481.html

This example gives me a good start. But the second question remains. Some comments about how to start working with TinyOS would be nice!

Thanks,
Peter


> Hi,
> 
> after reading the tutorial I wanted to start writing some own code. I  
> have a MSP board with a CAN controller connected to SPI. So I thought  
> this would be a nice task for me.
> 
> I started to write some code but got quickly got lost in uart / spi /  
> i2c / arbiter ... and other modules. My feeling is that I have to  
> know everything about he available modules and nesC for this  
> task ... :-(
> 
> I've two questions:
> 
> 1) Is there a (simple) example how to use i2c on MSP430?
> 
> 2) Where should I start designing. With the high level modules or the  
> lower level ones? I like to start with basic stuff and add more and  
> more code and modules. If possible always so that I have compilable  
> code all the time ...
> 
> Thanks,
> Peter
> 
> --
> Peter Mueller
> peter.o.mueller at gmx.de
> 
> 

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer