[Tinyos-help] Issue with CntToLedsAndRfm and RfmToLeds

[Alexandre Bergel]

Marcin, our local TinyOS expert, gave me a new Makerule replacing the  
one in /opt/tinyos-1.x/apps. It works fine now.
I can send it on request.

Thanks Marcin!

Cheers,
Alexandre


Am Jul 23, 2006 um 8:29 PM schrieb bhushan bhatt:

> I used tinyos 1.1.15 on XP. I was working with tmote and gave  
> command "make tmote install 0" and and install 1. As far as i  
> remember, u have to give id like 0 and 1. If you see in the  
> program, the mote with id 1 would send a binary countdown sequence  
> to mode with id 0. Try with 0 and 1 instead of 38 and 39. Let me  
> know later how you figure out the problem.
>
> Bhushan
>
> Alexandre Bergel <Alexandre.Bergel at cs.tcd.ie> wrote: Thank to  
> Bhushan and you for your answer.
>
> I tried to assign different ID, but it still does not work. I also
> tried:
> cd MicaHWVerify
> make mica2 install.38 "On a first mote"
>
> cd TOSBase
> make mica2 install.39 "On a second mote"
>
> But still no blinking leds on the second mote...
>
> I will see an expert in mote (Marcin) on Monday. I hope to solve this
> problem.
> I use TinyOS 1.1.0. with Windows XP.
>
> Cheers,
> Alexandre
>
>
>
> Am Jul 23, 2006 um 1:21 AM schrieb Michael Schippling:
>
> > You don't say what version of TOS, but I had variable results
> > until I used v1.1.7 and above, _and_ moved the app to the contrib/ 
> xbow
> > tree (which is the only place I could make mica2 radio work very
> > well).
> >
> > You might try MicaHWVerify and TOSBase to see if you have any radio
> > communication at all. Make sure your antennas are well connected.
> >
> > Also, it probably doesn't matter in this case, but you should assign
> > different IDs to each mote, like install.38 and install.39
> >
> > MS
> >
> > Alexandre Bergel wrote:
> >> Hello!
> >> I encounter some problem while trying to make two motes
> >> communicate each other.
> >> For instance, in the apps/CntToLedsAndRfm folder, I do a make
> >> mica2 install.38
> >> Then I use another mote, and in apps/RfmToLeds I do a make mica2
> >> install.38
> >> I would expect to see the value of the leds of the first mote to
> >> appear on the second motes. But it does not.
> >> Is there something obvious that I did not see ?
> >> Thanks a lot!
> >> Alexandre
> >> --_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> >> Alexandre Bergel http://www.cs.tcd.ie/Alexandre.Bergel
> >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
> >> _______________________________________________
> >> Tinyos-help mailing list
> >> Tinyos-help at Millennium.Berkeley.EDU
> >> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/
> >> tinyos-help
>
> -- 
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel http://www.cs.tcd.ie/Alexandre.Bergel
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at Millennium.Berkeley.EDU
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/ 
> tinyos-help
>
>
> See the all-new, redesigned Yahoo.com. Check it out.

-- 
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel  http://www.cs.tcd.ie/Alexandre.Bergel
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.