[Tinyos-help] Programmer is not responding!

[Ben Buckner]

>Date: Fri, 10 Nov 2006 12:04:26 +0100 (CET)
>From: walid hamdi <hi_walid at yahoo.fr>
>Subject: [Tinyos-help] Programmer is not responding!

>Hello Tinyosians!

>I was running the programming board perfectly, made
>some modifications in the TOSBase application just to
>send a message on the Radio.

>As i tried to install the new TOSBase application on
>the mote, i encontred the error

[...]
>    installing micaz binary using mib510
>uisp -dprog=mib510 -dserial=/dev/ttyS0
>--wr_fuse_h=0xd8 -dpart=ATmega128 --wr_fuse_e=ff 
>--erase --upload if=build/micaz/main.srec.out
>Programmer is not responding.
>make: *** [program] Error 2

Another thing to check is to make sure that the serial port isn't in use by
another application.

Ben B.