[Tinyos-help] Tutorial 4 question

[Conard, Andrew]

Hi,

The base station simply prints out packet information for any messages it receives. So you have to have another mote nearby that sends messages. Make sure the motes are fully charged and that the base station is still placed on the serial programming board (assuming that you are using the mica2 platform like we are). We always have to move the motes a little closer sometimes to make sure that the base station actually receives the packet.

-----Original Message-----
From: tinyos-help-bounces at Millennium.Berkeley.EDU on behalf of Sun Chao
Sent: Thu 11/23/2006 2:32 AM
To: tinyos-help at Millennium.Berkeley.EDU
Subject: [Tinyos-help] Tutorial 4 question
 
Hi

When I try the BaseStation and net.tinyos.tools.Listen in tutorial 4, I
can see that the Green Led is blinking, but when I type java
net.tinyos.tools.Listen -comm serial@/dev/ttyS0, I can not see any
packet information printed. What's the problem?


-- 
Regards


_______________________________________________
Tinyos-help mailing list
Tinyos-help at Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20061123/a02b2f8c/attachment.htm