[Tinyos-help] Programming MICAz in MIB600 problem

[Giri Baleri]

Hello Libor,

Couple of things to check:
- Is the switch on 5V position and PWR LED steady ON?
- Is the MICAz Mote seated properly into the MIB600 board? (press the
two boards firmly together)
- Can you try another MICAz and get it to program?

Regards,
Giri

-----Original Message-----
From: tinyos-help-bounces at Millennium.Berkeley.EDU
[mailto:tinyos-help-bounces at Millennium.Berkeley.EDU] On Behalf Of Libor
Roubal
Sent: Saturday, November 25, 2006 8:52 AM
To: tinyos-help at Millennium.Berkeley.EDU
Subject: [Tinyos-help] Programming MICAz in MIB600 problem

Hi all,
I have some troubles programming  Micaz in MIB600. I am not sure whether
the batteries have to be inserted and MICAz power switch should be in ON
position or not. MIB600 is powered from the mains supply.
I am getting message "AVR MCU not in the RESET state". Do you know what
can be the cause of this problem?

Thanks in advance.
Libor.

_______________________________________________
Tinyos-help mailing list
Tinyos-help at Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-hel
p