[Tinyos-help] Wiring parameterised interfaces

[Yong, Chee Yeew]

Thanks for the reply, but I wish it was that easy to solve.

I believe the problem to be that I am wiring the Timer erroneously in TestC.
However, I cannot put my finger on why my wiring is not acceptable to ncc. 

Chee

> -----Original Message-----
> From: Michael Schippling [mailto:schip at santafe.edu]
> Sent: 31 July 2007 18:57
> To: Yong, Chee Yeew 
> Cc: tinyos-help at Millennium.Berkeley.EDU
> Subject: Re: [Tinyos-help] Wiring parameterised interfaces
> 
> 
> I think you need to wire the Timer StdControl:
> 
>       Main.StdControl -> TimerC;
> 
> Yong, Chee Yeew wrote:
> > Hello all,
> > 
> > I am having a bit of a problem wiring parameterised 
> interfaces. The program
> > is as below.
> > 
> > I keep getting the error: 
> > "MyTimers.start() not connected".
> > 
> > I am not sure why it is complaining when I clearly have 
> MyTimers wired in
> > the Configuration file.
> > My environment is Cygwin with TinyOS 1.1.10.
> > 
> > Thanks for any help/advice.
> > 
> > Regards,
> > Chee
> > 
> > =========================================
> > Configuration file (TestC.nc):
> > configuration TestC {
> > }
> > implementation {
> >   components Main, TestM, TimerC;
> >   Main.StdControl -> TestM;
> >   TestM.MyTimers[0] -> TimerC.Timer[unique("Timer")];
> >   TestM.TimerControl -> TimerC;
> > }
> > 
> > ==========================================
> > Module file (TestM.nc):
> > module TestM {
> >   provides interface StdControl;
> >   uses {
> >     interface Timer as MyTimers[uint8_t tid];
> >     interface StdControl as TimerControl;
> >   }
> > }
> > implementation {
> >   event result_t MyTimers.fired[uint8_t tid]() {
> >     return SUCCESS;
> >   }
> > 	
> >   command result_t StdControl.init() {
> >     return call TimerControl.init();
> >   }
> > 
> >   command result_t StdControl.start() {
> >     call TimerControl.start();
> >     call MyTimers.start[0](TIMER_ONE_SHOT, 1000);
> >     return SUCCESS;
> >   }
> > 
> >   command result_t StdControl.stop() {
> >     return SUCCESS;
> >   }	
> > }
> > 
> > 
> **************************************************************
> *****************
> > Please consider the environment before printing this email.
> > 
> **************************************************************
> *****************
> > This email and any files transmitted with it are intended 
> solely for the use of
> > the individual or entity to whom they are addressed and may 
> not be divulged to
> > any third party without the express permission of the 
> originator.  Any views
> > expressed in this message are those of the individual 
> sender, except where the
> > sender specifically states them to be the views of Thales 
> Research & Technology
> > (UK) Limited.
> > 
> **************************************************************
> *****************
> > 
> > _______________________________________________
> > Tinyos-help mailing list
> > Tinyos-help at Millennium.Berkeley.EDU
> > 
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/
tinyos-help