[TINYOS-HELP]: cp: cannot stat `build/telosb/main.ihex': No such file or directory

[Michael Schippling]

I think the problem is an older version of cygwin,
but I'm pretty sure the answer is somewhere in the
help archive...Search for "getreent"

MS


Urs Hunkeler wrote:
> Hi Sam,
> 
> The first error probably means that it did not compile the telosb
> binary, possibly because of the second problem that you describe just below.
> 
> The second problem looks to me more like a problem with cygwin. I rarely
> use cygwin so I can't really help you there. Search the mailing list for
> the keywords cygwin and dll, or even directly for __getreent. Maybe
> updating cygwin could help.
> 
> Cheers,
> Urs
> 
> Renee Azhen schrieb:
>> Dear all:
>>   I updated my tinyos from V 1.x to version 2.02 with the updating instruction.
>>   But an error occured when upload the Blink to my telosb node:
>>   here is the info:
>>   ibm at ibm-vs2a1bhcns0 /opt/tinyos-2.x/apps/Blink
>> $ make telosb reinstall
>> cp build/telosb/main.ihex build/telosb/main.ihex.out
>> cp: cannot stat `build/telosb/main.ihex': No such file or directory
>> make: *** [setid] Error 1
>>    
>>   dear all, could you tell me how to fix this problem?
>>   and  if I type command: make telosb, another error occured:
>>   here is the output info:
>>   ibm at ibm-vs2a1bhcns0 /opt/tinyos-2.x/apps/Blink
>> $ make telosb
>> mkdir -p build/telosb
>>     compiling BlinkAppC to a telosb binary
>> ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow -DDEF_TOS_AM_
>> GROUP=0x7d -Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board= -DI
>> DENT_PROGRAM_NAME=\"BlinkAppC\" -DIDENT_USER_ID=\"ibm\" -DIDENT_HOSTNAME=\"ibm-v
>> s2a1bhcns0\" -DIDENT_USER_HASH=0x245ca709L -DIDENT_UNIX_TIME=0x4753f4d0L -DIDENT
>> _UID_HASH=0xa83bc5e1L  BlinkAppC.nc -lm
>> make: *** [exe0] Error 57
>>    
>>   And a warning box poped up:
>>   "the procedure entry point __getreent could not be located in the dynamic link library cygwin1.dll"
>>    
>>   I think maybe something wrong with the NesC tool, so I changed the NesC rpm from nesc-1.2.8a-1.cygwin.i386.rpm to nesc-1.2.8b-1.cygwin.i386.rpm. But still the same error occured.
>>    
>>   I have spent 12 hours for this problem, but still no progress achieved.
>>    
>>   Is there any nice guy can help me?
>>   Wating for your help!
>>    
>>   Best Regards &Thanks
>>   Sam
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at Millennium.Berkeley.EDU
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

-- 
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew