[Tinyos-help] basestation & uart0 on a telosb mote

[Peter de Cauwer]

Hi,

we are working on a project that requires interfacing a telosb with a
development board via RS232. First i used the basestation application to
interface the mote with the pc via uart1 ( the USB connector ), this worked
just fine. Then I connected the mote to PC again, this time using a MAX232
as a voltage regulator and connecting the mote via the expansion headers. I
modified PlatformSerialC so that is uses Msp430Uart0C instead of
Msp430Uart1C. Unfortunately this didn't work properly. I have searched the
mailing list, but there isnt a clear solution to this problem.

I understand that the problem lies with the uart0 bus arbitration. Is there
anyone who has succesfully done this or who can give us some advice as where
to start / what needs to be changed in the existing code? ( We are using
TinyOS 2 )

Any help will be appreciated.

Thanks,
Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20071210/1293baf5/attachment.html