回复： Re: [Tinyos-help]: SimpleCMD can't receive message (anotherstrangephenonmenon)

[Renee Azhen]

hi, ashrafalqudah
  thanks for your help:)
  I was always using MOTECOM=serial at COM9:57600, yet it doesn't work!
   
  if I upload the TOSBase into my node, the TOSBase works well, but if the SimpleCMD node can not receive message.
  I am so confuzed why I add GenericComm  into the TOSBase.nc, then the TOSBase node can't work, and the "write failed" was displayed on the SF.
   
  thanks all the same!
  Sam
  

ashrafalqudah at just.edu.jo 写道：
    hi Sam
  I faced a problem like this but I was using micaz platform not the telosb, however i solved it in very simple and unexpected solution you can try this:
  when you want to specify the baud rate when running the serialforwarder write it as number not telosb. in micaz i used  param = serial at COM1:57600  rather than param = serial at COM1:micaz
    believe me its worked.
  Thanks for all

----- Original Message -----
From: Renee Azhen 
Date: Tuesday, December 25, 2007 7:46 pm
Subject: [Tinyos-help]: SimpleCMD can't receive message (another strangephenonmenon)

> And another strange phenomena.
> If I add component TimerC into the TOSBase.nc, 
> for example:
> I change the code from:
> components Main, TOSBaseM, RadioCRCPacket as Comm, FramerM, 
> UART, LedsC;
> To 
> components Main, TOSBaseM, RadioCRCPacket as Comm, FramerM, 
> UART, LedsC, TimerC;
> and then, the TOSBase can't work either.
> 
> Why?? Could you tell me?
> thanks
> Sam
> 
> *********************************************************************************** dear all:
> Merry Christmas!
> 
> I have two telosb nodes.
> one is connected to a PC and programmed with TOSBase.
> the other is programmed with SimpleCMD.
> 
> when I run the BcastInject to send a message to the first 
> node, it works well(the Leds toggled), but the other node which 
> is programmed with SimpleCMD had no response.
> 
> I have searched in the Mailing list, and found many people 
> posted the same question, but none gave a good answer.
> 
> My nodes is telosb platform, could anyone tell me how to fix it?
> 
> Thanks
> Sam
> 
> 
> ---------------------------------
> ê×¨× 
> 
  


       
---------------------------------
雅虎邮箱传递新年祝福，个性贺卡送亲朋！ 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20071226/f321e1f1/attachment.htm