[Tinyos-help] tinyOS 1.x 2.0 interoperability

[Tempia Filippo]

I'm working in TinyOS 2.0 and I would like to program the BaseStation
application in order to receive packets from a TinyOS 1.1 mote with the
CntToLedsAndRfm application running on it.

As far as I understood there should be radio compatibility between
TinyOS 1.1 and 2.0, since the CC2420 is still the same. But it seems
that the Base Station does not receive any radio pcks from a TinyOS 1.1
Application.

It is only a matter of packet format or also of channel/frequency
selection?

How can I select a specific channel/frequency to listen to or send on,
in TinyOS 1.x and 2.0? 

Thanks.

 

------------------------------------------------------------------------
-------- 
Filippo TEMPIA 

Wireless Sensor Networks Lab

Under sponsorship of Pirelli and Telecom Italia

 

1995 University Ave. Suite 225 - Berkeley, CA 94705, USA

Tel. +1 (510) 666-0174 103 - Fax. +1 (510) 666-0174 

 

--------------------------------------------------------------------

CONFIDENTIALITY NOTICE

This message and its attachments are addressed solely to the persons above and may contain confidential information. If you have received the message in error, be informed that any use of the content hereof is prohibited. Please return it immediately to the sender and delete the message. Should you have any questions, please contact us by replying to webmaster at telecomitalia.it.

        Thank you

                                        www.telecomitalia.it

--------------------------------------------------------------------
                        
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20070111/bba813b6/attachment-0001.html