[Tinyos-help] Localization

[Bernardo Avila Pires]

Also, establish ID-based communication (by sending messages with data
about the sender) and, if you wish to log the values, create a volume
(tinyos-2 tutorial has material on this).
And, yes, use RSSI values.

2007/7/3, Firat TARAKTAS <Firat.TARAKTAS at genetlab.com>:
>
>
> Take RSSI values of the received signals. Use triangulation method. If you
> google it you can reach lots of material.
>
>
>
> Firat TARAKTAS
>
> Electrical&Electronics Engineer
>
> Reseracher
> GENETLAB INFORMATION TECHNOLOGIES
> Kayisdagi Caddesi Kar Plaza D Blok Kat:3 34752
> Icerenkoy / ISTANBUL / TURKIYE
> Phone: +90 (216) 573 00 85 (int.354)
> Fax:     +90 (216) 469 85 07
> firat.taraktas at genetlab.com
> www.genetlab.com
>
>
>  ________________________________
>  From: tinyos-help-bounces at Millennium.Berkeley.EDU
> [mailto:tinyos-help-bounces at Millennium.Berkeley.EDU] On
> Behalf Of Tarek Mohamed Salah El-Din Mansour
> Sent: Tuesday, July 03, 2007 4:08 AM
> To: tinyos-help at Millennium.Berkeley.EDU
> Subject: [Tinyos-help] Localization
>
>
>
>
>
> I want to ask if i have 4 different mica2 motes, three fixed and they should
> record the received signal from the forth. Using the received signal from
> the three receivers it should be approximately decided where is the place of
> the forth.
> Any ideas about how this could be done? i mean like how to save the signals
> from the 3 and be computed to localize the forth? and how could that be
> displayed?
>
> Thanks in advance.
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at Millennium.Berkeley.EDU
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>


-- 
"The truth shall set you free"
<a href="http://www.nerdtests.com/nq_ref.html">
<img src="http://www.nerdtests.com/images/badge/dc875a1ab1aff18f.gif"
alt="I am nerdier than 99% of all people. Are you a nerd? Click here
to find out!"></a>