[Tinyos-help] atmega128 clock frequency

[roberto pagliari]

my actual configuration, running
uisp -dprog=data -dpart=ATmega128 --rd_fuses

gives me the following
fuse low byte  0xff
fuse high byte 0xff
fuse extended byte 0xff
calibration byte      0xff - read only
lock bits  0xff

BLB12 -> 1
BLB11 -> 1
BLB02 -> 1
BLB01 -> 1
LB2     -> 1
LB1     -> 1

so, is it 7.3Mhz?

On 7/17/07, roberto pagliari <bobtinyos07 at gmail.com> wrote:
>
> my fuse low byte is set to 0xff. this means the clock frequency is 7.3Mhz(not 8Mhz) right?
>
> thank you in advance
>
> On 7/17/07, Michael Schippling < schip at santafe.edu> wrote:
> >
> > I think "change the crystal" is the only answer for the ATMEGA.
> > It's sounds like the MSP can be overclocked in software though.
> > MS
> >
> > roberto pagliari wrote:
> > > how can I set the clock frequency of motes microcontroller?
> > > I'm using micaz mote right now
> > >
> > >
> > >
> > ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Tinyos-help mailing list
> > > Tinyos-help at Millennium.Berkeley.EDU
> > >
> > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20070717/152405ed/attachment.html