[Tinyos-help] atmega128 clock frequency

[roberto pagliari]

I'm sorry, I issued the wrong command since I use a mib510. Now, writing

uisp -dprog=mib510 -dpart=ATmega128 -dserial=/dev/ttyS1 --rd_fuses

I get

fuse low byte  0xff
fuse high byte 0xd9
fuse extended byte 0xff
calibration byte      0x00 - read only
lock bits  0xff

BLB12 -> 1
BLB11 -> 1
BLB02 -> 1
BLB01 -> 1
LB2     -> 1
LB1     -> 1

the fuse low byte is 0xFF. Do you know if the frequency is 8 Mhz or 7.3 Mhz?
>From the datasheet is not clear, but I need precise time information.

thank you in advance

Roberto
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20070718/e8461033/attachment.htm