[Tinyos-help] XMeshBase install permission denied.

[Giri Baleri]

Error: Permission denied means that some other application is taking up
the COM port specified.
Please make sure that XSniffer, XServe etc are not running and using
this COM port.
 
Giri

________________________________

From: tinyos-help-bounces at Millennium.Berkeley.EDU
[mailto:tinyos-help-bounces at Millennium.Berkeley.EDU] On Behalf Of
Christopher Jenkins
Sent: Monday, July 23, 2007 4:47 PM
To: tinyos-help at Millennium.Berkeley.EDU
Subject: [Tinyos-help] XMeshBase install permission denied.


I have successfully loaded xmeshcounttoleds and xsniffer on cricket
motes, but when I attempt to do the same with xmeshbase I observe the
following output:
 
ec.out-0 0
    installing mica2 binary using mib510
uisp -dprog=mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out-0
 -> /dev/ttyS3 
 Error: Permission denied
make: *** [program] Error 1
 
 
The program goes through make fine. Where can I change these
permissions, if at all?
 
Thank you,
Chris Jenkins
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20070723/8d7029f4/attachment.html