[Tinyos-help] Does Mica2 2003 version works with TinyOS 2.x?[solved]

[Peizhao Hu]

My fault to edit the Makefile with an 0 at the end of 
CFLAGS=-DCC1K_DEFAULT_FREQ=CC1K_915_998_MHZ setting.

it works now.

but as the lesson 3 is about radio communication, what would be really 
helpful if the documentation actually mention about the setting of 
frequency in order to bring up our attention of different radio 
frequencies in different hardwares.
It will help to avoid lots of confusion like what I have.

Again sorry.

Peizhao Hu wrote:
> Sorry to my previous reply.
>
> just realized in TinyOS 2.X is using constants to set freq.
>
> however when I tried this:
>
> /opt/tinyos-2.x/apps/RadioCountToLeds$ 
> CFLAGS=-DCC1K_DEFAULT_FREQ=CC1K_915_998_MHZ make mica2 install
> mkdir -p build/mica2
>    compiling RadioCountToLedsAppC to a mica2 binary
> ncc -o build/mica2/main.exe -Os -finline-limit=100000 -Wall -Wshadow 
> -Wnesc-all -target=mica2 -fnesc-cfile=build/mica2/app.c -board=micasb 
> -DCC1K_DEFAULT_FREQ=CC1K_915_998_MHZ0 -fnesc-dump=wiring 
> -fnesc-dump='interfaces(!abstract())' 
> -fnesc-dump='referenced(interfacedefs, components)' 
> -fnesc-dumpfile=build/mica2/wiring-check.xml RadioCountToLedsAppC.nc -lm
> In file included from 
> /opt/tinyos-2.x/tos/chips/cc1000/CC1000CsmaRadioC.nc:72,
>                 from 
> /opt/tinyos-2.x/tos/chips/cc1000/CC1000ActiveMessageC.nc:57,
>                 from 
> /opt/tinyos-2.x/tos/platforms/mica2/ActiveMessageC.nc:60,
>                 from /opt/tinyos-2.x/tos/system/AMQueueP.nc:43,
>                 from /opt/tinyos-2.x/tos/system/AMSenderC.nc:50,
>                 from RadioCountToLedsAppC.nc:48:
> In component `CC1000ControlP':
> /opt/tinyos-2.x/tos/chips/cc1000/CC1000ControlP.nc: In function 
> `CC1000Control.init':
> /opt/tinyos-2.x/tos/chips/cc1000/CC1000ControlP.nc:282: 
> `CC1K_915_998_MHZ0' undeclared (first use in this function)
> /opt/tinyos-2.x/tos/chips/cc1000/CC1000ControlP.nc:282: (Each 
> undeclared identifier is reported only once
> /opt/tinyos-2.x/tos/chips/cc1000/CC1000ControlP.nc:282: for each 
> function it appears in.)
> make: *** [exe0] Error 1
>
> why it changes my constant to  CC1K_915_998_MHZ0 ??
>
>
>
>
> Philip Levis wrote:
>> On Jun 2, 2007, at 2:51 AM, Peizhao Hu wrote:
>>
>>> Hi, All,
>>>
>>> I just received a mote kit from my supervisor she bought in year 2003.
>>> I have setup TinyOS 2.X on my ubuntu machine. And I tested it will 
>>> the Blink application without any problem.
>>> However, when I got to Lesson 3 that require one of the mote to 
>>> receive packet from over the radio. It didn't do anything.
>>> I confirmed it triggered the AMSend.send command with
>>> call Leds.led0Toggle();
>>> just after the send command. and it does blink.
>>>
>>> but the toggling of Led1 in my receive never occurs.
>>> I also tested it with the RadioCountToLeds example, which came with 
>>> TinyOS 2.x package, but it is the same, no luck.
>>>
>>> so my question is whether my hardware compatible with TinyOS 2.x.
>>>
>>> The hardware specification I can see on the board:
>>> MPR400CB
>>> 2003  CrossBow C29
>>> with 900MHZ
>>
>> Yes, it is compatible. But you need to tell TinyOS that you are using 
>> a 900MHz radio, not a 433MHz radio (the default). If you search 
>> through the archives there are a lot of messages on how to do this.
>>
>> Phil
>

-- 
regards;

Peizhao