[Tinyos-help] please help!

[Michael Schippling]

By saying that the hardware verification passes, you mean that you
tested the radio link? Or just verified directly plugged into the MIB?

And what version of TOS? If T1, you should use the contrib/xbow tree
to build apps because it contains radio code that actually works.

I can't help with the TinyDB part, but if you use something like
CntToLedsAndRfm on the re-Motes, TOSBase on the base-station (both
compiled under xbow), and Listen on the PC, you should be able to
verify that the radio links are working correctly.

Then it's just a matter of software...heh

MS


Minnie Virk wrote:
> hi,
>  
> im trying something very very simple with tinydb and mica2 motes on 
> MIB510. im trying to get temperature and light readings in tinydb gui. 
> the basestation is connected using a usb to serial converter, and all 
> the motes have been programmed with TinyDBApp. but somehow when i run 
> the query the sensor motes do not respond with the red led. the yellow 
> and the green blinks on the sensor, all leds blink on the basestation 
> mote but there is no data streaming in the gui. the topology screen is 
> blank. the aim_id is -1 and i have all things possible to get this 
> working. toscheck completes without errors and the hardware verification 
> on the motes also passes. i have tried to use moteview but am lost as to 
> how do i program motes to communicate with moteview.
>  
> please help!
>  
> regards
> minnie virk
> 
> No need to miss a message. Get email on-the-go 
> <http://us.rd.yahoo.com/evt=43910/*http://mobile.yahoo.com/mail >
> with Yahoo! Mail for Mobile. Get started. 
> <http://us.rd.yahoo.com/evt=43910/*http://mobile.yahoo.com/mail >
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at Millennium.Berkeley.EDU
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help