[Tinyos-help] CC2420 getPower() question.

[Jonathan Hui]

Ah, the actual intended transmit power is not carried in the packet.
The getPower/setPower commands are only useful on the transmitting
node.

-- 
Jonathan W. Hui
jwhui at cs.berkeley.edu
http://www.cs.berkeley.edu/~jwhui/

On 3/12/07, davivale at nmsu.edu <davivale at nmsu.edu> wrote:
> Jonathan,
>
> I am actually using getRssi() and getLqi and those both work fine.
>
> Dave
> Quoting Jonathan Hui <jwhui at cs.berkeley.edu>:
>
> > Try using the CC2420Packet.getRssi(.) command.
> >
> > --
> > Jonathan W. Hui
> > jwhui at cs.berkeley.edu
> > http://www.cs.berkeley.edu/~jwhui/
> >
> > On 3/12/07, davivale at nmsu.edu <davivale at nmsu.edu> wrote:
> > > I am using TinyOS 2.0 and the TelosB platform.  I have a transmitting node
> > and I
> > > am setting the tx power level on a per packet basis.  For the receiving
> > node,
> > > upon reception of a packet I am using the getPower() function in order to
> > record
> > > the power levels of each incoming packet.  My issue is that for each
> > packet
> > > received I am just seeing zeros for the tx power of all incoming packets.
> > Thanks.
> > >
> > > Dave
> > >
> > > _______________________________________________
> > > Tinyos-help mailing list
> > > Tinyos-help at Millennium.Berkeley.EDU
> > > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> > >
> >
>
>
>