[Tinyos-help] MIB600 115200

[Giri Baleri]

Here's what you need to do to change the default baud rates for the
MIB600.
 
1. Open a web browser and type the IP address of MIB600. You should see
Lantronix web manager page.
2. From the left hand menu corner, click on Channel 1 and and the
default settings should be:
    Serial Port Speed: 115200
    Port :10001

3. From the left hand menu corner, click on Channel 2 and the default
settings should be:
    Serial Port Speed: 57600
    Port:10002

4. If you make changes above, save/update the settings.
 
I hope that helps,
Giri

________________________________

From: tinyos-help-bounces at Millennium.Berkeley.EDU
[mailto:tinyos-help-bounces at Millennium.Berkeley.EDU] On Behalf Of
JeongKwanhee
Sent: Tuesday, October 02, 2007 6:19 AM
To: tinyos-help at Millennium.Berkeley.EDU
Subject: [Tinyos-help] MIB600 115200



Hello! Everybody.

 

I am trying to change the baud rate from 57600 to 115200 on MIB600.

However, I cannot operate correctly. I do not know why it is not
running.

 

So, I will write down about my trial for changing rate.

First, I tried.

In eprb.extra  file, I added -dport=10001 on uisp programming.

.....is not run..

 

Second, I tried.

I changed HPLUART0M.nc file as follows.

outp(15, UBRR0L) -> outp(7, UBRR0L)

...is not run..

 

At result of my test, it always runs just to 10002 port(57600bps).

 

If somebody know how to change the baud rate, please reply to this.

 

Thank you

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20071002/d75700d2/attachment.html