[Tinyos-help] Is it possible to adjust MOTE/MiCAz's transmit powe r in the middle of the process

[Murray, Ben]

For the Micaz (and Telos?) I think you can use CC2420Config and CC2420Power
interfaces in the CC2420ControlC Component
tinyos-2.x\tos\chips\cc2420\control to adjust RF settings on the fly - it
works for changing the channel, not tried it with power myself, but I'd have
thought there would be a way to do it
 

-----Original Message-----
From: tinyos-help-bounces at Millennium.Berkeley.EDU
[mailto:tinyos-help-bounces at Millennium.Berkeley.EDU]On Behalf Of Chang
Sent: 03 October 2007 08:27
To: tinyos-help at Millennium.Berkeley.EDU
Subject: [Tinyos-help] Is it possible to adjust MOTE/MiCAz's transmit power
in the middle of the process


As we all know, we need to specify some transmit power for the nodes and
compile it then upload to the nodes to run.
But in this way, the power is pre-specified and cannot be changed.
I wonder if it is possible to change the power in the middle. Or anyone
knows what hardware platform can do this (like Telos)? 

Thanks for your information.



*******************************************************************************
Please consider the environment before printing this email.
*******************************************************************************
This email and any files transmitted with it are intended solely for the use of
the individual or entity to whom they are addressed and may not be divulged to
any third party without the express permission of the originator.  Any views
expressed in this message are those of the individual sender, except where the
sender specifically states them to be the views of Thales Research & Technology
(UK) Limited.
*******************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20071003/ed12e6c3/attachment.htm