[Tinyos-help] C and nesC problems

[Daniel Widyanto]

Hi,

Under TinyOS-2.x tree, there's a directory called : support/sdk/c.
Compile the source using : make, the result is libmote.a to be 
linked to your C-program.

To send the command to serial forwarder : see the example in 
sfsend.c.

Basically, what you need to do is :
1) Open sf channel using : sf_descr = open_sf_source(inet_addr, port_addr)
2) To write to sf channel, use : write_sf_packet(sf_descr, &data, dataLength)

Hope that helps.

Regards,

-daniel

-------- Original Message --------
> From: "Chan kenniel" <kennielchan at gmail.com>
> Sent: Friday, September 21, 2007 5:14 PM
> To: "tinyos forum" <tinyos-help at Millennium.Berkeley.EDU>
> Subject: [Tinyos-help] C and nesC problems
> 
> Dear all,
> 
> I have modified the oscillcope application to send message to PC by
> connecting to the serial forwarder, however, this is nesC to nesC
> communication.
> I am wondering whether there's any way to write a C file to send message to
> serial forwarder ? If there is, could you please give me an example?
> 
> Thanks a lot.
> 
> 
> -- 
> Best wishes,
> Kenneth Chan