[Tinyos-help] "Listen" tool shows "resynchronizing", and never displays values

[shankar satish]

Hi All,

On a remote mote, I have installed OscilloscopeRF(It broadcasts Photo sensor
values). On the base-station mote, I have installed TOSBase. The
base-station mote is connected to the PC. After this, I set MOTECOM values
appropriately and ran the "listen" tool.
The "Listen" tool permanently displays "resynchronizing" message, and never
prints the values.

The "Listen" tool runs properly when the base-station is installed with
Oscilloscope. (Oscilloscope sends photo sensor values directly over UART).

Any pointers and help is much appreciated.

Thank you.

-Regards,
Shankar.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080401/85543ad1/attachment.html