[Tinyos-help] CntToLedsAndRfm and RfmToLeds not working

[Michael Schippling]

oops sorry, the frequency defines are part of the xbow contrib in:
     contrib/xbow/tos/platform/mica2/CC1000Const.h
I do my compiles from withing that tree so I pick them up.
If you don't do that you should be able to used the "old" way
of defining the radio channel in the standard apps makefiles.
I believe the power setting is the thing of interest, and is
also common to both.

MS


Prashant Pillai wrote:
> Hi Michael,
>  
> Thanks for your reply.
>  
> I added my own makelocal with the requried parameters. But now it gives 
> the following error:
>  
> C:/Progra~1/UCB/cygwin/opt/tinyos-1.x/tos/platform/mica2/CC1000ControlM.nc:393:'RADIO_916BAND_CHANNEL_00' 
> undeclared <first use in function>
>  
> Is there any particular reason that it works for the Micaz motes but 
> does not work for the Mica2 motes.
> 
> Prashant
> On Mon, Mar 24, 2008 at 6:26 PM, Michael Schippling <schip at santafe.edu 
> <mailto:schip at santafe.edu>> wrote:
> 
>     If you're using T1 (and probably T2 as well) make sure you have defined
>     the same radio channel and kicked the xmit power up. That's pretty much
>     what the xbow makefile does for mica2's. Look for:
> 
>        CFLAGS = -DCC1K_DEFAULT_FREQ=RADIO_916BAND_CHANNEL_0
>        CFLAGS += -DRADIO_XMIT_POWER=0xFF
> 
>     MS
> 
>     Prashant Pillai wrote:
> 
> 
>         Hi All,
>          I am having some probelms with radio comms. for the Mica2 mote.
>         I have installed CntToLedsAndRfm in Mote 1 and RfmToLeds on Mote
>         2, but on switching them on, the Mote 2 does not show anything
>         on the leds. I have also reversed the programs and tried with
>         other sets of motes. Interesting the program works for my MICAZ
>         motes. The problem is only with the MICA2 ones that I have. I am
>         not using the xbow contributions at the moment, so the
>         CntToLedsAndRfm and the RfmToLeds are the ones present in the
>         tinyos apps. is it because of this? I remember earlier when I
>         used to use the xbow contribs on another old machine there was a
>         MakeXbowLocal file. I tried copyin that over to my new machine
>         but starting getting several errors.
>          Can someone please help me with this?
>          Thanking you in advance.
>          Regards
>         Prashant Pillai
> 
> 
>         ------------------------------------------------------------------------
> 
>         _______________________________________________
>         Tinyos-help mailing list
>         Tinyos-help at millennium.berkeley.edu
>         <mailto:Tinyos-help at millennium.berkeley.edu>
>         https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> 
> 
>     -- 
>     Platform: WinXP/Cygwin
>     TinyOS version: 1.x, Boomerang
>     Programmer: MIB510
>     Device(s): Mica2, MicaZ, Tmote
>     Sensor board: homebrew
> 
> 
> 
> 
> -- 
> Dr Prashant Pillai
> School of Engineering, Design and Technology
> University of Bradford
> Bradford, BD7 1DP
> West Yorkshire
> United Kingdom

-- 
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew