[Tinyos-help] Generic File Datasink in Xserve

[Giri Baleri]

How did you start XServe? (i.e. did you use -xr, -xp flags)? 

Giri

-----Original Message-----
From: Javier Zazo [mailto:timshel86 at gmail.com] 
Sent: Saturday, April 12, 2008 3:44 PM
To: Giri Baleri
Cc: tinyos-help at millennium.berkeley.edu
Subject: Re: [Tinyos-help] Generic File Datasink in Xserve

Thanks, but it didn't work either. I also changed the slashes "/" to "\"
that are the ones that windows uses, but still didn't work.
Any other ideas? Thanks a lot.
Javier

2008/4/11, Giri Baleri <mbaleri at xbow.com>:
> I think you need to specify the absolute path (not the relative path  
> that Cygwin uses).
>  Eg. C:/Crossbow/Cygwin/opt/raw_surge_data.txt
>
>  Giri
>
>
>  -----Original Message-----
>  From: tinyos-help-bounces at millennium.berkeley.edu
>  [mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of 
> Javier  Zazo
>  Sent: Friday, April 11, 2008 10:41 AM
>  To: tinyos-help at millennium.berkeley.edu
>  Subject: [Tinyos-help] Generic File Datasink in Xserve
>
>  Hi,
>  I am using Xserve in Moteworks, and when I create a xml file for  
> parsing, I cannot make the Generic File Datasink create any file (not

> the raw, parsed or converted). This is the datasink code:
>                         <XDataSink name="Generic File Datasink">
>                                 <XDSParam name="rawfilename"
>  value="/opt/raw_surge_data.txt" />
>                                 <XDSParam name="parsedfilename"
>  value="/opt/parsed_surge_data.txt" />
>                                 <XDSParam name="delim" value="," />
>                                 <XDSParam name="header" value="yes" />
>                         </XDataSink>
>  Xserve gives no error, and the Generic Print Datasink works well. 
> When I  start sending packages they are shown in the screen. Then I 
> shut xserve  and close cygwin, but I find no file in the location
directory.
>  What I am doing wrong? (I have already read the manual, and I think 
> I've  followed it correctly). How should it be done? Could anyone post

> a  working example?
>  Thank you in advance.
>
> _______________________________________________
>  Tinyos-help mailing list
>  Tinyos-help at millennium.berkeley.edu
>  
>
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>