[Tinyos-help] (no subject)

[Giri Baleri]

If you are using XMesh apps from MoteWorks, then configuring them in
High Power (HP) mode would leave the radio in Receive state all the time
and thus ensure continuous reception. Enabling the end to end ACK on the
packets would make sure that a acknowledgement is sent upon the packet
is received at the base.
 
Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
Lakshmi Pradeep
Sent: Monday, April 21, 2008 1:07 AM
To: anantha; ben; brewer; nes; hari; nesC; Levis at cs.berkeley.edu;
mdw at eecs.harvard.edu; techsupport
Subject: [Tinyos-help] (no subject)


Hi,
                 My name is Lakshmi Pradeep.I am doing M.Tech in
Computational Engineering and Networking. My  project topic is cluster
based routing in Wireless sensor networks and  I am using micaz
motes,mib520 programming board ,mts310 sensorboard and Moteworks
Platform for nesC programming.

                 Please help me with a receiving side program of radio
communication.So I want to program  continuous reception of
messages.These receiving side motes must send a reply to sender motes.I
tried following code to check continuous reception.But receiver mores
are working only with the first send data.Progress of my project
entirely depends on this.

Thanks in advance,
Lakshmi


________________________________

Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try
it now.
<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i6
2sR8HDtDypao8Wcj9tAcJ> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080421/01cc0aac/attachment.htm