[Tinyos-help] Temperature sensor on mica2dot

[Giri Baleri]

Please refer to MDA500 related apps that sample and send the onboard temp sensor data. You can use:
    \opt\MoteWorks\apps\xsensor\XSensorMDA500 - for single hop
    \opt\MoteWorks\apps\xmesh\XMDA500 - for multihop
 
Regards,
Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu [mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of ??
Sent: Wednesday, April 30, 2008 2:13 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] Temperature sensor on mica2dot


Hi! I am trying to get the temperature data from the on board sensor of mica2dot, but the data is always 03FF without any changes when environment temperature varies. My code is basically copied from the tutorials included in the moteworks install files.Is there any differeces for mica2dot on board sensor operation comparing with other sensor boards? Can I get sample code for this?
 
Thanks!
 
 
LIU Yong




 

________________________________

用 Windows Live Spaces 展示个性自我，与好友分享生活！ 了解更多信息！ <http://spaces.live.com/?page=HP>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080430/42cf615f/attachment.htm