[Tinyos-help] parameters in MoteView

[Giri Baleri]

If you are referring to MTS400/420 outputs, the "humtemp" is the ambient
temperature output as read by the Sensirion sensor and the "prtemp" is
the temperature reading as measured by the Intersema barometric pressure
sensor. The latter is not required for most applications, but it is
necessary to allow for temperature compensation of the pressure output
(MoteView does this for you).
 
- Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of Nguyen
Xuan Hung
Sent: Monday, August 04, 2008 9:57 PM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] parameters in MoteView


I am a beginner. I sorry for my simple question. But could anyone tell
me what is humtemp and prtemp in MoteView?
Thanks alot.
 
NGUYEN 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080805/db9b3f86/attachment.htm