[Tinyos-help] GPIO and Sensirion SHT11

[Davide]

Hi,

Is it possible to configure the GPIO bus in the micaz mote to interface it
with the Sensirion SHT11(
http://www.sensirion.com/en/01_humidity_sensors/02_humidity_sensor_sht11.htm)
that have a 2 line communication port like (but not the same as) I2C.
wich pins of the 51-pin connector can be used and how

thanks in advance

Davide
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080810/d9823b32/attachment.htm