[Tinyos-help] Blink Micaz mib520,/dev/ttyUSB0 error.

[Jierui Cao]

Hi guys working in TinyOS 2.x, 

I just begin to work inTinyOSm which is installed in
Xubuntos(http://toilers.mines.edu/Public/XubunTOS), and now I am working on
the Lesson 1 in the TinyOS tutorial. 

When I try the command line of:

Make micaz install mib520,/dev/ttyUSB0

I got a lot of errors like:

..

flash error at address 0x8a0:file=0x90, mem=0xff

flash error at address 0x8a1:file=0x0f, mem=0xff

..

And I also learnt in the following link:

http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2006-July/018095.h
tml

that the MIB520 board is not supported by TinyOS 2.x until Jul 21, 2006, at
11:30 AM

 

So my question is, are the MIB520 now supported by TinyOS now, since I have
only MIB520 programming board, if have not been supported, is there any
other methods to use 520 ?

Any comments or suggestions are welcomed. 

And thanks for your patience to finish this email.

BEST.

                                                     Jierui

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080822/d3006a92/attachment.htm