[Tinyos-help] Blink Micaz mib520,/dev/ttyUSB0 error.

[Michael Schippling]

I think you can use "mib510" in the make command line.
MS

Jierui Cao wrote:
> Hi guys working in TinyOS 2.x,
> 
> I just begin to work inTinyOSm which is installed in 
> Xubuntos(http://toilers.mines.edu/Public/XubunTOS), and now I am working 
> on the Lesson 1 in the TinyOS tutorial.
> 
> When I try the command line of:
> 
> Make micaz install mib520,/dev/ttyUSB0
> 
> I got a lot of errors like:
> 
> ….
> 
> flash error at address 0x8a0:file=0x90, mem=0xff
> 
> flash error at address 0x8a1:file=0x0f, mem=0xff
> 
> ……
> 
> And I also learnt in the following link:
> 
> http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2006-July/018095.html
> 
> that the MIB520 board is not supported by TinyOS 2.x until Jul 21, 2006, at 11:30 AM
> 
>  
> 
> So my question is, are the MIB520 now supported by TinyOS now, since I 
> have only MIB520 programming board, if have not been supported, is there 
> any other methods to use 520 ?
> 
> Any comments or suggestions are welcomed.
> 
> And thanks for your patience to finish this email.
> 
> BEST.
> 
>                                                      Jierui
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help