[Tinyos-help] Make Mica2 Install

[Clinton, David D]

Ladies and Gents,

Could someone give me some advice or a solution to a problem I am having
writing to the sensor nodes?? The error I am receiving is located below... If
you guys have experience this before please give feedback as I am need of
help...

Thanks,


[clinton at groom Blink]$ make mica2 install
mkdir -p build/mica2
    compiling BlinkAppC to a mica2 binary
ncc -o build/mica2/main.exe -Os -finline-limit=100000 -Wall -Wshadow
-DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=mica2
-fnesc-cfile=build/mica2/app.c -board=micasb  -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/mica2/wiring-check.xml BlinkAppC.nc -lm
    compiled BlinkAppC to build/mica2/main.exe
            2688 bytes in ROM
              57 bytes in RAM
avr-objcopy --output-target=srec build/mica2/main.exe build/mica2/main.srec
avr-objcopy --output-target=ihex build/mica2/main.exe build/mica2/main.ihex
    writing TOS image
cp build/mica2/main.srec build/mica2/main.srec.out
    installing mica2 binary with dapa
uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff  --erase
/dev/parport0: No such file or directory
Failed to open ppdev.
make: *** [program] Error 2