[Tinyos-help] Unable to install Blink application toirismote using MIB520 contoller and tiny os 2.x

Tue Dec 9 08:31:32 PST 2008

IRIS platform is supported under MoteWorks and TinyOS 2.x.

If your TinyOS 1.x can't compile for MICAz, then you haven't applied
necessary RPMs. I think MICAz is supported in 1.1.10 and onwards. IRIS
is not supported under any TinyOS 1.x RPM.

Imote2 is supported under both TinyOS 1.x and 2.x, but you need to apply
required patches. Please refer to IMote2 forum for details.

http://tech.groups.yahoo.com/group/intel-mote2-community/

Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of Rahul
Iyer
Sent: Monday, December 08, 2008 7:54 PM
To: tinyos-help at millennium.berkeley.edu
Subject: Re: [Tinyos-help] Unable to install Blink application
toirismote using MIB520 contoller and tiny os 2.x

I'm pretty sure its an Iris mote.

I tried installing tinyos1.x using the windows installer - but I get
flash errors.

In addition, it appears that I can't compile directly for iris. The only
options I am allowed is mica, mica2 and mica2dot. I dont understand why
I can't compile for micaz or iris.

Furthermore, the installer doesn't provide files for the intelmote2
either!

Do you know where I can find complete instructions for installation to
compile on iris and intelimote2?

My Iris mote is directly connected to the MIB520CA board, and from there
to the computer. Do yout think I need to connect it to any other boards
too?

Thanks

Rahul

----------------------------------------------------------------------

	Message: 1
	Date: Sun, 7 Dec 2008 14:08:19 -0600
	From: "Janos Sallai" <sallai at isis.vanderbilt.edu>
	Subject: Re: [Tinyos-help] Unable to install Blink application
to
	            irismote           using MIB520 contoller and tiny
os 2.x
	To: "Rahul Iyer" <rahulaiyer at gmail.com>,   "tinyos help"
	            <tinyos-help at millennium.berkeley.edu>
	Message-ID:

<18201740812071208k511f7524k97dae9e48b82e4ab at mail.gmail.com>
	Content-Type: text/plain; charset=ISO-8859-1

	Rahul,

	Please make sure that
	1. the mote is properly mounted on the programming board
	2. that your mote is indeed an iris (this may sounds stupid, but
this
	has happened before...)
	3. that /dev/ttyUSB0 is really your mib520 (i.e. do any of the
leds
	blink when you're trying to program)

	Janos

	On Fri, Dec 5, 2008 at 11:57 PM, Rahul Iyer
<rahulaiyer at gmail.com> wrote:

	Hi,

		I am trying to compile and install the blink application
for an irismote

		using MIB520 and tinyos-2.x

		I can get the application to compile. But I can't get it
to install. I am

		not sure what to do. Any suggestions? I have tried
install.0, install.42 etc

		- I get the same output...

		The output is below. Thanks,

		Rahul

		Compiling seems to work:

------------------------------------------------------------------------
--------------------------------

		$ make iris

		mkdir -p build/iris

		   compiling BlinkAppC to a iris binary

		ncc -o build/iris/main.exe  -Os -Wall -Wshadow
-Wnesc-all -target=iris

		-fnesc-cfile=build/iris/app.c -board=micasb
-DDEFINED_TOS_AM_GROUP=0x22

		--param max-inline-insns-single=100000
-DIDENT_APPNAME=\"BlinkAppC\"

		-DIDENT_USERNAME=\"monday\" -DIDENT_HOSTNAME=\"Monday\"

		-DIDENT_USERHASH=0x6fc7776cL
-DIDENT_TIMESTAMP=0x493a0c69L

		-DIDENT_UIDHASH=0x1df5c139L -fnesc-dump=wiring

		-fnesc-dump='interfaces(!abstract())'
-fnesc-dump='referenced(interfacedefs,

		components)' -fnesc-dumpfile=build/iris/wiring-check.xml
BlinkAppC.nc -lm

		   compiled BlinkAppC to build/iris/main.exe

		           2268 bytes in ROM

		             51 bytes in RAM

		avr-objcopy --output-target=srec build/iris/main.exe
build/iris/main.srec

		avr-objcopy --output-target=ihex build/iris/main.exe
build/iris/main.ihex

		   writing TOS image

		installation gives all sorts of strange messages

------------------------------------------------------------------------
------------------------------------------------------

		$ make iris install.0 mib520,/dev/ttyUSB0

		mkdir -p build/iris

		   compiling BlinkAppC to a iris binary

		ncc -o build/iris/main.exe  -Os -Wall -Wshadow
-Wnesc-all -target=iris

		-fnesc-cfile=build/iris/app.c -board=micasb
-DDEFINED_TOS_AM_GROUP=0x22

		--param max-inline-insns-single=100000
-DIDENT_APPNAME=\"BlinkAppC\"

		-DIDENT_USERNAME=\"monday\" -DIDENT_HOSTNAME=\"Monday\"

		-DIDENT_USERHASH=0x6fc7776cL
-DIDENT_TIMESTAMP=0x493a0c84L

		-DIDENT_UIDHASH=0x12371ebeL -fnesc-dump=wiring

		-fnesc-dump='interfaces(!abstract())'
-fnesc-dump='referenced(interfacedefs,

		components)' -fnesc-dumpfile=build/iris/wiring-check.xml
BlinkAppC.nc -lm

		   compiled BlinkAppC to build/iris/main.exe

		           2268 bytes in ROM

		             51 bytes in RAM

		avr-objcopy --output-target=srec build/iris/main.exe
build/iris/main.srec

		avr-objcopy --output-target=ihex build/iris/main.exe
build/iris/main.ihex

		   writing TOS image

		tos-set-symbols build/iris/main.srec
build/iris/main.srec.out-0

		TOS_NODE_ID=0 ActiveMessageAddressC$addr=0

		Could not find data section in build/iris/main.exe,
aborting.

		Could not find symbol ActiveMessageAddressC$addr in
build/iris/main.exe,

		ignoring symbol.

		Could not find symbol TOS_NODE_ID in
build/iris/main.exe, ignoring symbol.

		   installing iris binary using mib510

		avrdude -cmib510 -P/dev/ttyUSB0 -U hfuse:w:0xd9:m
-pm1281 -U efuse:w:0xff:m

		-C/etc/avrdude/avrdude.conf  -U
flash:w:build/iris/main.srec.out-0:a

		avrdude: AVR device initialized and ready to accept
instructions

		Reading |
################################################## | 100% 0.05s

		avrdude: Device signature = 0xffffff

		avrdude: Yikes!  Invalid device signature.

		        Double check connections and try again, or use
-F to override

		        this check.

		avrdude done.  Thank you.

		make: *** [program] Error 1

		_______________________________________________

		Tinyos-help mailing list

		Tinyos-help at millennium.berkeley.edu

https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20081209/0b0b6fae/attachment-0001.htm 