[Tinyos-help] Deluge T2 and TOS_NODE_ID

[Razvan Musaloiu-E.]

Hi!

On Mon, 15 Dec 2008, Razvan Musaloiu-E. wrote:

> Hi!
>
> On Sun, 14 Dec 2008, Jamie Macbeth wrote:
>
>> I'm running Tinyos-2.x from CVS on iris motes.  I'm trying run Deluge
>> T2, and in my application every node needs to know its ID.
>> Dissemination and reboot seem to work properly for all of the Deluge
>> connected nodes, but TOS_NODE_ID is identical for all nodes when I use
>> it in my app.
>>
>> With some searching I felt assured that TOS_NODE_ID is being
>> hard-coded in the c source created in the build process
>> (build/iris/app.c).  So I guess that TOS_NODE_ID isn't supposed to
>> work with Deluge.  When I Deluge-ping nodes connected via serial they
>> seem to know their node ids... I assume that they are being read from
>> storage.  How can I  ID in tinyos applications that are disseminated
>> through Deluge?
>
> The TOS_NODE_ID is hard-coded on the app.c but upon boot the DelugeC is
> restoring it. The code that is doing this for IRIS is the Init.init from
> tos/lib/net/Deluge/extra/iris/NetProgM.nc. I'll check tomorrow on MicaZ to
> see if everything works as it should.

I just tested MicaZ and it works fine. The TOS_NODE_ID is properly 
restored after a -dr command. Janos, can you confirm this result for IRIS? 
:-)

--
Razvan ME