[Tinyos-help] Deluge T2 and TOS_NODE_ID

[Razvan Musaloiu-E.]

Hi!

On Fri, 19 Dec 2008, Jamie Macbeth wrote:

> Hi, Razvan,
>
> I just did a simple test of the restoration of TOS_NODE_ID on the
> iris.  Now it seems to work properly!  I think earlier I was using a
> stale app image in which DelugeC wasn't properly wired in.  Sorry for
> troubling you.
>
> By the way, I was required to copy over the volumes-*.xml files in
> order for the iris image to build with DelugeC wired in and with
> "BOOTLOADER=tosboot" in the Makefile.  It may be worthwhile to add
> this to the instructions in the Deluge T2 Wiki or elsewhere.

The "BOOTLOADER=tosboot" was already in the manual. I also added the 
instruction about volumes-*.xml. Thanks for catching this problem! :-)

--
Razvan ME

> DelugeC.nc doesn't build without the volumes-*.xml files, and that
> caused me to attempt to disseminate images without it, which, I think,
> in the end, caused my trouble with TOS_NODE_ID.
>
> Much thanks,
>
> Jamie
>
>
> On Mon, Dec 15, 2008 at 4:08 PM, Razvan Musaloiu-E. <razvanm at cs.jhu.edu> wrote:
>
>>> The TOS_NODE_ID is hard-coded on the app.c but upon boot the DelugeC is
>>> restoring it. The code that is doing this for IRIS is the Init.init from
>>> tos/lib/net/Deluge/extra/iris/NetProgM.nc. I'll check tomorrow on MicaZ to
>>> see if everything works as it should.
>>
>> I just tested MicaZ and it works fine. The TOS_NODE_ID is properly restored
>> after a -dr command. Janos, can you confirm this result for IRIS? :-)
>>
>> --
>> Razvan ME
>>
>