[Tinyos-help] net.tinyos.tools.Listen MIB600 No data is seen on theDisplay

[Giri Baleri]

The port 10001 of MIB600 is used to program the Mote and port 10002 is
used to read data from the base Mote.
You need to set the MOTECOM variable to port 10002 of your MIB600 for
the PC tools to read data.
 
Regards,
Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
Giovanni Abu-Aita
Sent: Monday, February 11, 2008 9:29 PM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] net.tinyos.tools.Listen MIB600 No data is seen on
theDisplay


hello everybody,
I am running the Oscilloscope Application on the mote that is connected
to MIB600.
I am trying to read the packets and display them on the screen using
net.tinyos.tools.Listen but nothing seems to appear on the screen. with
MIB510 everything goes fine. with MIB600 I set the value of MOTECOM: 
export MOTECOM:network at 192.168.0.5:10001 but still the Listen gives me: 
network at 192.168.0.5:10001: resynchronising........ and stops there.
anybody can help in this. 
P.S. : 
1) I had this problem before and I have changed the settings of the
MIB600 by browsing it: I set the Speed of channel 1 to 115200 and the
speed of channel 2 57600 and i made sure the ports are 10001 and 10002
respectively. Fortunately It worked. But now I don;t know what I did
wrong; I even restored to factory settings  plus the changes above but
it did;t work. 
2) I also tried the SerialForwarder but it seemed it doesn't read the
packets.

Any help??? Thanks in advance


________________________________

Never miss a thing. Make Yahoo your homepage.
<http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080214/0fb802df/attachment.html