[Tinyos-help] MoteView

[Martin Turon]

Hi Abdullah,

 

This is possible, but there are some limitations to consider:

 

1)     xserve will log the packets from both applications to the
database with no issues (all the data will be captured)

 

2)     MoteView can only display one type of sensorboard at a time - you
will need to switch database tables to view the data relevant to you.

 

3)     XMesh will only be able to forward packets that are smaller than
the maximum packet size of the firmware.  You will need to verify that
XMDA300 and XMTS400 have similar packet sizes.  We can provide you 2.0.G
firmware that allocates larger buffers to allow forwarding of any sensor
packet over the network without issue.

 

Martin 

__________________________________________________
Martin Turon  |  Crossbow Technology, Inc.

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
Abdullah Kadri
Sent: Friday, January 04, 2008 7:19 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] MoteView

 

Hello,

Can we show two different motes programmed with two different
applications (i.e. XMDA300 and XMTS400) on MoteView at the same time? 

Thanks,

 

Abdullah Kadri, P.Eng., Ph.D. Candidate 
The University of Western Ontario 
Department of Electrical and Computer Engineering 
Phone: (519) 661-2111 ext. 81271

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080104/f0235cbb/attachment.html