[Tinyos-help] MicaZ OEM module programmer

[Giri Baleri]

Hello Asier,
 
The OEM module programmer is nothing but a packaged of MIB510
programming board with socket interface for the OEM module. It should
connect to your PC via serial COM port (typically COM1). So, your
programming command should be something like
    make <platform> install,<n> mib510,com<X>
 
I hope that helps,
Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of Asier
Arruti
Sent: Wednesday, January 30, 2008 4:13 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] MicaZ OEM module programmer


Hi again,

We are trying to load MICAz OEM with a programme that we had previously
tested (The programmer is shown in the picture). However, we have found
no reference of how to configure the MakeXbowlocal file, and the
documents we have found only mention how to build new boards; so, how
can we use this module programmer? 

Thanks in advance,

Asier


________________________________

Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try
it now.
<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i6
2sR8HDtDypao8Wcj9tAcJ> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080130/bf6006e9/attachment.htm