[Tinyos-help] problems with tymo-dymo

[Varun Jain]

Hi,
A bunch of errors where it is not finding components like Leds and
others, you should look into the Makefile and see if you are pointing to
the correct place to look for those components, like I have this in my
Makefile:

PFLAGS += -I$(TOSDIR)/lib/net/tymo -I$(TOSDIR)/lib/net/tymo/mh
-I$(TOSDIR)/lib/net/tymo/dymo -I../tymaluate/monitor/
-I../tymaluate/sense/

Secondly, the errors are because of "Payloadlength". If you closely see
the code, Romain uses Send interface to access this field but there was
a big switchover in 4 main interfaces in September 2007 i.e AMSend,
Packet, Send... interfaces and thereafter wherever you use Packet
interface, you will have to add the length parameter.

The command in 'Packet' interface is:
command void* getPayload(message_t* msg, uint8_t len);

For example, in your first error , i.e.
In component `MHPacketM':
../../tos/lib/net/multihop/MHPacketM.nc:38: conflicting types for
`Packet.getPayload'
/opt/tinyos-2.x/tos/interfaces/Packet.nc:115: previous declaration of
`Packet.getPayload'

It is complaining that there is a conflict for this parameter, if you
have a current CVS of tinyos-2.x then probably you will have to change
the MHPacketM-line 38 to:
command void * Packet.getPayload(message_t *msg, uint8_t len), It may be
possible that your MHPacketM-line 38 does not have the length parameter
which the Packet interface has if you checked out the CVS after
September 2007.

Try doing this and it will reduce number of errors, then post again with
the rest of the errors..


Varun Jain
R&D Embedded Design Engineer
Spiderbox Pty. Ltd.
P: +617 3318 9509
F: +617 3318 9595
M: +61401 091 248
E: varun at spiderbox.com.au
W: http://www.spiderbox.com.au


-----Original Message-----
From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
fhg07 at c3sl.ufpr.br
Sent: Wednesday, July 02, 2008 12:10 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] problems with tymo-dymo

Well, I was searching for some implemented protocols for tinyOS 2.x and
I found this one, which seemed to be what I was looking for. However,
after downloading its source and placing it inside my tinyos2
installation
directory, whenever I try to create the binary, with make, lots of
errors
appear, and I really cannot understand why that happens.

For instance, when I am in the MHBaseStation/ Directory, and type make
mica2,
that is what follows:

"fernando at baco:/opt/tinyos2/tinyos-2.x-src/apps/MHBaseStation$ make
mica2
mkdir -p build/mica2
    compiling TymaBaseAppC to a mica2 binary
ncc -o build/mica2/main.exe  -Os -I../../tos/lib/net/dymo
-I../../tos/lib/net/multihop -I../tymaluate/monitor/
-I../tymaluate/sense/
-Wall -Wshadow -Wnesc-all -target=mica2 -fnesc-cfile=build/mica2/app.c
-board=micasb -DDEFINED_TOS_AM_GROUP=0x22 -finline-limit=100000
-DIDENT_PROGRAM_NAME=\"TymaBaseAppC\" -DIDENT_USER_ID=\"fernando\"
-DIDENT_HOSTNAME=\"baco.inf.ufpr.b\" -DIDENT_USER_HASH=0x92905e1aL
-DIDENT_UNIX_TIME=0x486a3a0fL -DIDENT_UID_HASH=0xb0fea519L
-fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())'
-fnesc-dump='referenced(interfacedefs, components)'
-fnesc-dumpfile=build/mica2/wiring-check.xml TymaBaseAppC.nc -lm
../tymaluate/monitor/MonitorM.nc:1:26: dymo_routing.h: No such file or
directory
In file included from TymaBaseAppC.nc:11:
In component `MonitorC':
MonitorC.nc:5: failed to preprocess ../tymaluate/monitor/MonitorM.nc
MonitorC.nc:5: component DymoNetworkC not found
MonitorC.nc:8: cannot find `Leds'
MonitorC.nc:9: cannot find `Read'
MonitorC.nc:10: cannot find `SplitControl'
MonitorC.nc:11: cannot find `DymoMonitor'
MonitorC.nc:12: cannot find `RoutingTableInfo'
MonitorC.nc:18: cannot find `Receive'
MonitorC.nc:19: cannot find `MHSend'
MonitorC.nc:20: cannot find `Intercept'
MonitorC.nc:22: cannot find `MHPacket'
In file included from BaseStationC.nc:73,
                 from TymaBaseAppC.nc:13:
In component `ConverterM':
ConverterM.nc:30: conflicting types for `AMSend.getPayload'
/opt/tinyos2/tinyos-2.x-src/tos/interfaces/AMSend.nc:124: previous
declaration of `AMSend.getPayload'
ConverterM.nc: In function `AMSend.getPayload':
ConverterM.nc:31: too few arguments to function
ConverterM.nc: At top level:
ConverterM.nc:46: `getPayload' is not in interface `Receive'
ConverterM.nc: In function `Receive.getPayload':
ConverterM.nc:47: interface has no command or event named `getPayload'
ConverterM.nc: At top level:
ConverterM.nc:50: `payloadLength' is not in interface `Receive'
ConverterM.nc: In function `Receive.payloadLength':
ConverterM.nc:51: interface has no command or event named
`payloadLength'
In component `BaseStationC':
BaseStationC.nc: At top level:
BaseStationC.nc:77: cannot find `SplitControl'
BaseStationC.nc:87: cannot find `MHSend'
BaseStationC.nc:88: cannot find `Receive'
BaseStationC.nc:89: cannot find `Receive'
BaseStationC.nc:90: cannot find `MHPacket'
BaseStationC.nc:96: cannot find `Packet'
BaseStationC.nc:97: cannot find `MHPacket'
make: *** [exe0] Error 1"

Any idea of what could possibly be wrong?

_______________________________________________
Tinyos-help mailing list
Tinyos-help at millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help