[Tinyos-help] consultion

[Abhishek Anand]

I faced the same problem with my micaz motes. replacing 520 by 510 solved
the problem
try the command:
make mica2 reinstall mib510,com3

Regards,
Abhishek
IIT Guwahati

On Sun, Jul 13, 2008 at 1:30 PM, xuanwang150 <xuanwang150 at 163.com> wrote:

>
>  Dear sir or madam,
>     Now, I have only a MIB520 programming board, and I can't understand how
> to properly program it. In the Blink directory, I use:
> make mica2 reinstall mib520,com3
>    The output of this command is usually:
>  mkdir -p build/mica2
>     compiling Blink to a mica2 binary
> ncc -o build/mica2/main.exe -Os -finline-limit=100000 -Wall -Wshadow
> -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=mica2 -fnesc-cfile=build/mica2/a
> pp.c -board=micasb -I%T/lib/Deluge -DIDENT_PROGRAM_NAME=\"Blink\"
> -DIDENT_USER_ID=\"root\" -DIDENT_HOSTNAME=\"localhost.local\"
> -DIDENT_USER_HAS
> H=0x53b81074L -DIDENT_UNIX_TIME=0x485afa8cL -DIDENT_UID_HASH=0xf93fe13aL
> Blink.nc -lm
>     compiled Blink to build/mica2/main.exe
>             1502 bytes in ROM
>               49 bytes in RAM
> avr-objcopy --output-target=srec build/mica2/main.exe build/mica2/main.srec
> avr-objcopy --output-target=ihex build/mica2/main.exe build/mica2/main.ihex
>     writing TOS image
> cp build/mica2/main.srec build/mica2/main.srec.out
>     installing mica2 binary with dapa
> uisp -dprog=dapa --wr_fuse_h=0xd8 -dpart=ATmega128 --wr_fuse_e=ff  --erase
> pulse
> Atmel AVR ATmega128 is found.
> Erasing device ...
> pulse
> Reinitializing device
> Atmel AVR ATmega128 is found.
> Fuse High Byte set to 0xd8 Fuse Extended Byte set to 0xff
> sleep 1
> uisp -dprog=dapa --wr_fuse_h=0xd8 -dpart=ATmega128 --wr_fuse_e=ff  --upload
> if=build/mica2/main.srec.out
> pulse
> Atmel AVR ATmega128 is found.
> Uploading: flash
> Fuse High Byte set to 0xd8
> Fuse Extended Byte set to 0xff
> sleep 1
> uisp -dprog=dapa --wr_fuse_h=0xd8 -dpart=ATmega128 --wr_fuse_e=ff  --verify
> if=build/mica2/main.srec.out
> pulse
> Atmel AVR ATmega128 is found.
> Verifying: flash
> flash error at address 0x0: file=0x0c, mem=0x00
> flash error at address 0x1: file=0x94, mem=0x00
> flash error at address 0x2: file=0x46, mem=0x00
> flash error at address 0x4: file=0x0c, mem=0x00
> flash error at address 0x5: file=0x94, mem=0x00
> flash error at address 0x6: file=0x63, mem=0x00
> flash error at address 0x8: file=0x0c, mem=0x00
> flash error at address 0x9: file=0x94, mem=0x00
> flash error at address 0xa: file=0x63, mem=0x00
> flash error at address 0xc: file=0x0c, mem=0x00
> flash error at address 0xd: file=0x94, mem=0x00
> flash error at address 0xe: file=0x63, mem=0x00
> flash error at address 0x10: file=0x0c, mem=0x00
> flash error at address 0x11: file=0x94, mem=0x00
> flash error at address 0x12: file=0x63, mem=0x00
> flash error at address 0x14: file=0x0c, mem=0x00
> flash error at address 0x15: file=0x94, mem=0x00
> flash error at address 0x16: file=0x63, mem=0x00
> flash error at address 0x18: file=0x0c, mem=0x00
>
>
> ............
> And at last:
>
> flash error at address 0x1f92f: file=0x24, mem=0xff
> flash error at address 0x1f930: file=0x08, mem=0xff
> flash error at address 0x1f931: file=0x95, mem=0xff
> flash error at address 0x1f933: file=0xcf, mem=0xff
>
>
> Fuse High Byte set to 0xd8
> Fuse Extended Byte set to 0xff
>
>    Can you tell me why these mistakes happen and how to properly program a
> mica2 using the MIB 520?
> Thank you very much!
>                                            yours
>                                         xuanwang Liu
>
>
>
>
>
> ------------------------------
> 渊波阔宅 湖景人生 <http://popme.163.com/link/003984_0707_2982.html>
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080713/df5f6dae/attachment.htm