[Tinyos-help] the value of PA_POW

[Giri Baleri]

In MoteWorks, the RF power can be specified at compile time using a
variable called "RADIO_POWER" in MakeXbowlocal file (several pre-defined
values exist). I would think that a similar option exists under TinyOS.
 
Giri


________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of wang
wei
Sent: Tuesday, July 22, 2008 8:33 AM
To: tinyos-help at millennium.berkeley.edu
Subject: Re: [Tinyos-help] the value of PA_POW


sorry, the correct question should be how to change the values of RF
outputs in the address 0x0B


On Tue, Jul 22, 2008 at 8:30 AM, wang wei <viviennetiti at gmail.com>
wrote:


	hi all
	in the crossbow user manual its said "The radio on the MICA2 can
be adjusted for a range of output power levels.
	The register in the radio that controls the RF power level is
designated PA_POW at address 0x0B, and the values and their
corresponding RF
	outputs are provided on Table 2-2 below." 
	who knows how to change the value of PA_POW? thanks 
	
	
	Vi
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080722/9fffbf42/attachment.htm