[Tinyos-help] something wrong happened in CC1000 driver in tinyos-2.x tree of cvs version

[Philip Levis]

On May 30, 2008, at 1:22 PM, Dima Kogan wrote:

> I can confirm this. My CC1000-based motes work fine with the 2.0.2
> release but crash with the latest cvs. I run a modified BlinkToRadio
> to test, with one node only transmitting and the other node only
> receiving. The transmitting node works ok. The receiving node seems
> to crash. As a test, I turn on an LED in Boot.booted() and don't
> turn it off in any part of the code. This LED blinks or turns off at
> various times on the transmitted node, which indicates that the mote  
> is
> rebooting. ALso, the first packet from the transmitter is always
> received properly, with the erroneous behavior starting with the  
> second
> packet.

There have only been a few small changes to the CC1000 stack; the  
first was that it actually checks for CRCs, the second was the  
inclusion of support for 4 bit link estimation.

Om, you were going to run some tests on mica2dots, right? Can you see  
if you encounter this problem?

Phil