[Tinyos-help] PySerial problem in Deluge T2

[Dan]

Janos,

Thank you so much. It went through. PySerial is not shipped with Xubuntos.

Dan


On 6/10/08, Janos Sallai <sallai at isis.vanderbilt.edu> wrote:
> Dan,
>
> The error message is correct: you have to install PySerial separately.
> You can get it from http://pyserial.sourceforge.net/
>
> Janos
>
> -----Original Message-----
> From: tinyos-help-bounces at millennium.berkeley.edu
> [mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of Dan
> Sent: Tuesday, June 10, 2008 6:07 PM
> To: tinyos-help at millennium.berkeley.edu
> Subject: [Tinyos-help] PySerial problem in Deluge T2
>
> Hi, there,
>
> Following the deluge T2 tutorial, I tried to test Quick Start on Iris.
> When the command "./burn /dev/ttyUSB0 iris" was executed, an error
> occured as follows:
>
> Please install PySerial first.
>
> I've installed the latest CVS and the python scripts following the
> Tools Installation section. Any ideas? Thanks in advance.
>
> Dan
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>