[Tinyos-help] about mit510's Reset Button

[Siirtola Harri]

It resets the mote attached to MIB510. Programming failures don't occur
because of MIB510 state, it's always ok if not electrically broken. The
most common reasons are badly attached mote, TX switch in the wrong
position and wrong programming command format.
 
Regards,
 
    Harri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of Yu Qun
Sent: Wednesday, June 11, 2008 2:45 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] about mit510's Reset Button



hi everyone:

I want to ask a question,  what is the function of Reset Button on
MIB510? If I upload some coding on the programming board such as mib50
not successfully, can I use the "reset button" to get the initial state
of MIB510? 
Thanks!
 
Sincerely;
Maggie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080611/2a2a1ee5/attachment.htm